PEAVEY CROSSOVERS
| Passive
Crossovers ECS3X | ECS150X | ECS1000X | ECS1800X |
ACTIVE CROSSOVERS
PV35XO
3-way stereo operation. 4-way and 5-way mono operation. Variable state filter controls. 24dB/octave LR filters. Mute capabilities for each output level control. XLR inputs and outputs for balanced operation on each channel.
| Model | Description | Sugg List |
Our Price |
| PV35XO | 3-way Stereo 4-way and 5-way Mono Active Crossover |  |
PV23XO
2-way stereo or 3-way mono. Mute switches. 24 dB filters and mute switches. Fully-adjustable crossover frequencies and levels. XLR input and output connectors. Internal power supply.
| Model | Description | Sugg List |
Our Price |
| PV23XO | 2-way Stereo 3-way Mono Active Crossover | |
VSX26
2 input/6 output loudspeaker DSP management system. Features per input: 27-band Graphic EQ, Autograph algorithm for automatic EQ settings, Compressor/Limiter, Delay (340 ms). Features per output: Crossover/Bandpass filter (Butterworth, Bessel, Linkwitz-Riley), Parametric EQ (5-band, HP, LP Notch, Horn EQ, All-Pass), Compressor/Limiter, Delay. USB for memory storage.
| Model | Description | Sugg List |
Our Price |
| VSX26 | 2 Input / 6 Output Active Crossover | |
VSX48
5 inputs/8 output loudspeaker DSP management system. Features per input: 6-band PEQ, Compressor/Limiter, Delay (340 ms). Features per output: Crossover/Bandpass filter (Butterworth, Bessel, Linkwitz-Riley), 5-band Parametric EQ, Compressor/Limiter, Delay. USB for memory storage.
| Model | Description | Sugg List |
Our Price |
| VSX48 | 5 Input / 8 Output Active Crossover | |
PASSIVE CROSSOVERS
ECS3X
Features of
the Peavey ECS3X:
Electro-Acoustic Crossover Frequencies: 500 Hz and 2500 Hz. Crossover Slope: 12 dB/Oct. (2nd order) Low pass, band pass and high pass. High pass has CD horn EQ and tweeter attenuation built-in. Power Handling of Crossover Network (when connected to suitable power handling speakers, and an amplifier with adequate headroom): 1000W program material. Midrange and Tweeter Protection: SoundGuard long and medium term thermal overload protection. Sized to protect a midrange from 75W to 100W of rated power handling, and a compression driver tweeter with a power handling rating from 40W to 80W. Inputs: One quarter inch phone jack paralleled with one Neutrik NL4 Speakon 4-pin connector for Full Range inputs. One Neutrik NL4S Switching Speakon for bi-amp inputs, allows direct connection to the speakers in the system. Only Neutrik brand 4-pin Speakon plugs should be used with the bi-amp switching jack. Outputs: Woofer output is a yellowblue set of wires, with stripped tinned leads. Yellow is positive, blue is negative. Midrange output is a white-black set of wires, with S205 push-on connectors that mate with a wide variety of midrange speakers. White is positive, black is negative. Tweeter output is a red-black set of wires, with S205 pushon connectors that mate with a wide variety of compression driver tweeters. Red is positive, black is negative. Intended Low Frequency Speaker Type: Direct radiator 15" professional sound reinforcement woofer of 8 Ohms nominal impedance. A 12" professional sound reinforcement woofer that has adequate low frequency response can also be used. Intended Mid-range Speaker Type: Direct radiator dynamic midrange, from 10" diameter to 6 " in diameter and of 8 Ohms nominal impedance. Open or closed back type, but open back type should have a sub-enclosure for the rear to prevent woofer from modulating the mids via cabinet pressure. Intended High Frequency Speaker Type: 1.6" to 4" diaphragm diameter compression driver tweeter of 8 Ohms nominal impedance, mounted on a Constant Directivity horn.
Electro-Acoustic Crossover Frequencies: 500 Hz and 2500 Hz. Crossover Slope: 12 dB/Oct. (2nd order) Low pass, band pass and high pass. High pass has CD horn EQ and tweeter attenuation built-in. Power Handling of Crossover Network (when connected to suitable power handling speakers, and an amplifier with adequate headroom): 1000W program material. Midrange and Tweeter Protection: SoundGuard long and medium term thermal overload protection. Sized to protect a midrange from 75W to 100W of rated power handling, and a compression driver tweeter with a power handling rating from 40W to 80W. Inputs: One quarter inch phone jack paralleled with one Neutrik NL4 Speakon 4-pin connector for Full Range inputs. One Neutrik NL4S Switching Speakon for bi-amp inputs, allows direct connection to the speakers in the system. Only Neutrik brand 4-pin Speakon plugs should be used with the bi-amp switching jack. Outputs: Woofer output is a yellowblue set of wires, with stripped tinned leads. Yellow is positive, blue is negative. Midrange output is a white-black set of wires, with S205 push-on connectors that mate with a wide variety of midrange speakers. White is positive, black is negative. Tweeter output is a red-black set of wires, with S205 pushon connectors that mate with a wide variety of compression driver tweeters. Red is positive, black is negative. Intended Low Frequency Speaker Type: Direct radiator 15" professional sound reinforcement woofer of 8 Ohms nominal impedance. A 12" professional sound reinforcement woofer that has adequate low frequency response can also be used. Intended Mid-range Speaker Type: Direct radiator dynamic midrange, from 10" diameter to 6 " in diameter and of 8 Ohms nominal impedance. Open or closed back type, but open back type should have a sub-enclosure for the rear to prevent woofer from modulating the mids via cabinet pressure. Intended High Frequency Speaker Type: 1.6" to 4" diaphragm diameter compression driver tweeter of 8 Ohms nominal impedance, mounted on a Constant Directivity horn.
| Model | Description | Sugg List |
Our Price |
| ECS3X | Passive Crossover | |
ECS150X
Features of
the Peavey ECS150X:
Electro-Acoustic Crossover Frequency: 150 Hz. Crossover Slope: 12 dB/octave (2nd Order) high pass and low pass. Power Handling of Crossover Network (when connected to suitable power handling speakers, and an amplifier with adequate headroom): 1000W program material. Inputs: One quarter inch phone jack for Full Range input. One Neutrik NL4S Switching Speakon for direct connection to the speaker/s in the subwoofer system. Only Neutrik brand 4-pin Speakon plugs should be used with the bi-amp switching jack. Outputs: Subwoofer output is a yellowblue set of wires, with stripped tinned leads. Yellow is positive, blue is negative. High Pass output is one quarter inch phone jack on the input cup, labeled: High Out. Intended Speaker Type: 4 to 8 Ohm nominal impedance subwoofer driver with or without connection of a 4 to 8 Ohm nominal full-range speaker system as the high frequency section. A range of impedances is allowed due to the broad tuning of the crossover network.
Electro-Acoustic Crossover Frequency: 150 Hz. Crossover Slope: 12 dB/octave (2nd Order) high pass and low pass. Power Handling of Crossover Network (when connected to suitable power handling speakers, and an amplifier with adequate headroom): 1000W program material. Inputs: One quarter inch phone jack for Full Range input. One Neutrik NL4S Switching Speakon for direct connection to the speaker/s in the subwoofer system. Only Neutrik brand 4-pin Speakon plugs should be used with the bi-amp switching jack. Outputs: Subwoofer output is a yellowblue set of wires, with stripped tinned leads. Yellow is positive, blue is negative. High Pass output is one quarter inch phone jack on the input cup, labeled: High Out. Intended Speaker Type: 4 to 8 Ohm nominal impedance subwoofer driver with or without connection of a 4 to 8 Ohm nominal full-range speaker system as the high frequency section. A range of impedances is allowed due to the broad tuning of the crossover network.
| Model | Description | Sugg List |
Our Price |
| ECS150X | Passive Crossover | |
ECS1000X
Features of
the Peavey ECS1000X:
Electro-Acoustic Crossover Frequency: 1000 Hz. Crossover Slope: 12 dB/Oct. (2nd order) Low pass and high pass. High pass has CD horn EQ and tweeter attenuation built-in. Power Handling of Crossover Network (when connected to suitable power handling speakers, and an amplifier with adequate headroom): 1000W program material. Tweeter Protection: SoundGuard long- and medium- term thermal overload protection. Inputs: One quarter inch phone jack paralleled with one Neutrik NL4 Speakon 4 pin connector for Full Range inputs. One Neutrik NL4S Switching Speakon for bi-amp inputs, allows direct connection to the speakers in the system. Only Neutrik brand 4-pin Speakon plugs should be used with the bi-amp switching jack. Outputs: Woofer output is a yellowblue set of wires, with stripped tinned leads. Yellow is positive, blue is negative. Tweeter output is a red-black set of wires, with S205 push-on connectors that mate with a wide variety of compression driver tweeters. Red is positive, black is negative. Intended Low Frequency Speaker Type: Direct radiator 15" professional sound reinforcement woofer. A 12" professional sound reinforcement woofer that has adequate low frequency response can also be used. Intended High Frequency Speaker Type: 1.6" to 4" diaphragm diameter compression driver tweeter, mounted on a Constant Directivity horn.
Electro-Acoustic Crossover Frequency: 1000 Hz. Crossover Slope: 12 dB/Oct. (2nd order) Low pass and high pass. High pass has CD horn EQ and tweeter attenuation built-in. Power Handling of Crossover Network (when connected to suitable power handling speakers, and an amplifier with adequate headroom): 1000W program material. Tweeter Protection: SoundGuard long- and medium- term thermal overload protection. Inputs: One quarter inch phone jack paralleled with one Neutrik NL4 Speakon 4 pin connector for Full Range inputs. One Neutrik NL4S Switching Speakon for bi-amp inputs, allows direct connection to the speakers in the system. Only Neutrik brand 4-pin Speakon plugs should be used with the bi-amp switching jack. Outputs: Woofer output is a yellowblue set of wires, with stripped tinned leads. Yellow is positive, blue is negative. Tweeter output is a red-black set of wires, with S205 push-on connectors that mate with a wide variety of compression driver tweeters. Red is positive, black is negative. Intended Low Frequency Speaker Type: Direct radiator 15" professional sound reinforcement woofer. A 12" professional sound reinforcement woofer that has adequate low frequency response can also be used. Intended High Frequency Speaker Type: 1.6" to 4" diaphragm diameter compression driver tweeter, mounted on a Constant Directivity horn.
| Model | Description | Sugg List |
Our Price |
| ECS1000X | Passive Crossover | |
ECS1800X
Features of
the Peavey ECS1800X:
Electro-Acoustic Crossover Frequency: 1800 Hz. Crossover Slope: 12 dB/Oct. (2nd order) Low pass and high pass. High pass has CD horn EQ and tweeter attenuation built-in. Power Handling of Crossover Network (when connected to suitable power handling speakers, and an amplifier with adequate headroom): 1000W program material. Tweeter Protection: SoundGuard long- and medium- term thermal overload protection. Inputs: One quarter-inch phone jack paralleled with one Neutrik NL4 Speakon 4 pin connector for Full Range inputs. One Neutrik NL4S Switching Speakon for bi-amp inputs, allows direct connection to the speakers in the system. Only Neutrik brand 4 pin Speakon plugs should be used with the bi-amp switching jack. Outputs: Woofer output is a yellow-blue set of wires, with stripped tinned leads. Yellow is positive, blue is negative. Tweeter output is a red-black set of wires, with S205 push-on connectors that mate with a wide variety of compression driver tweeters. Red is positive, black is negative. Intended Low Frequency Speaker Type: Direct radiator 12" professional sound reinforcement woofer. Extended range 15" professional sound reinforcement woofers can also be used. Intended High Frequency Speaker Type: 1.4" to 4" diaphragm diameter compression driver tweeter, mounted on a Constant Directivity horn.
Electro-Acoustic Crossover Frequency: 1800 Hz. Crossover Slope: 12 dB/Oct. (2nd order) Low pass and high pass. High pass has CD horn EQ and tweeter attenuation built-in. Power Handling of Crossover Network (when connected to suitable power handling speakers, and an amplifier with adequate headroom): 1000W program material. Tweeter Protection: SoundGuard long- and medium- term thermal overload protection. Inputs: One quarter-inch phone jack paralleled with one Neutrik NL4 Speakon 4 pin connector for Full Range inputs. One Neutrik NL4S Switching Speakon for bi-amp inputs, allows direct connection to the speakers in the system. Only Neutrik brand 4 pin Speakon plugs should be used with the bi-amp switching jack. Outputs: Woofer output is a yellow-blue set of wires, with stripped tinned leads. Yellow is positive, blue is negative. Tweeter output is a red-black set of wires, with S205 push-on connectors that mate with a wide variety of compression driver tweeters. Red is positive, black is negative. Intended Low Frequency Speaker Type: Direct radiator 12" professional sound reinforcement woofer. Extended range 15" professional sound reinforcement woofers can also be used. Intended High Frequency Speaker Type: 1.4" to 4" diaphragm diameter compression driver tweeter, mounted on a Constant Directivity horn.
| Model | Description | Sugg List |
Our Price |
| ECS1800X | Passive Crossover | |
